Emerging Innovative technologies and Materials in Hydropower Sector

A review

Authors

  • Henok Seman Department of Environmental Engineering, Civil and Environmental Engineering Faculty, Near East University, 99138 Nicosia (via Mersin 10, Turkey), Cyprus
  • Gözen E?KIRAN Department of Environmental Engineering, Civil and Environmental Engineering Faculty, Near East University, 99138 Nicosia (via Mersin 10, Turkey), Cyprus

Keywords:

Hydropower, Novel technologies, novel materials, hydropower flexibility, turbines

Abstract

Various technological developments are now occurring in the hydropower sector. New technologies and practices are being developed to improve the hydropower system's adaptability and sustainability. To boost performance, durability, and flexibility, new novel materials that have been discovered through various research projects have also recently been introduced. In addition to improving efficiency, resistance, dependability, and durability, these cutting-edge materials have the potential to have a substantial impact on the hydropower sector's ability to manufacture, install, and transport equipment. Several novel materials are being introduced and numerous studies are continuing in the hydropower industry. Novel materials can be used for both new power plants and restoration projects. This study describes the most relevant novel materials used in various hydropower structure parts and components.

Downloads

Download data is not yet available.

References

HYPERBOLE project. hydropower plants Performance and flexible Operation towards Lean integration of new renewable Energies, 2013– 2017.

Trivedi Chirag, Cervantes Michel, Gandhi Bhupendra, Ole Gunnar Dahlhaug. Experimental investigations of transient pressure variations in a high head model Francis turbine during start-up and shutdown, 2014.

Thicke RH. Practical solutions for draft tube instability. Water Power Dam Constr, 1981.

Kurokawa Junichi, Kajigaya A, Matusi Jun, Imamura Hiroshi. Suppression of swirl in a conical diffuser by use of J-groove. Symposium on hydraulic machinery and systems, 2000..

Kurokawa Junichi, Imamura Hiroshi, Choi Young-Do. Effect of J-groove on the suppression of swirl flow in a conical diffuser, 2010.

Falvey Henry T. Draft tube surges–a review of present knowledge and an annotated bibliography, 1971.

Alexander Gokhman. Hydraulic turbine and exit stay apparatus therefor, 2005.

Susan-Resiga Romeo, Constantin T?nas?, Alin Ilie Bosioc, Ciocan Tiberiu, Adrian Ciprian Stuparu, Muntean Sebastian. Method and equipment for controlling the swirling flow through the conical diffuser of hydraulic turbines, 2014.

Benoit Papillon, Sabourin Michel, Couston Michel, Deschenes Claire. Methods for air admission in hydro turbines. Proc. Of the 21st IAHR symposium on hydraulic machinery and systems Switzerland, 2002.

Kjeldsen Morten, Olsen Knut, Nielsen Torbjørn, Ole Gunnar Dahlhaug. Water injection for the mitigation of draft tube pressure pulsations. IAHR international meeting of the workgroup on cavitation and dynamic problems in hydraulic machinery and systems, Spain, 2006.

Gabriel Dan Ciocan, Thi C Vu, Bernd Nennemann, E Demer, Romeo Susan-Resiga. Jet control of the draft tube vortex rope in Francis turbines at partial discharge, 2006.

Constantin T?nas?, Alin Ilie Bosioc, Susan-Resiga Romeo F, Muntean Sebastian. Experimental investigations of the swirling flow in the conical diffuser using flowfeedback control technique with additional energy source, 2012.

Oliver Kirschner, Schmidt Helmuth, Albert Ruprecht, Mader R, Meusburger P. Experimental investigation of vortex control with an axial jet in the draft tube of a model pump-turbine. IOP conference series, 2010.

Blommaert Gino. Etude du comportement dynamique des turbines francis: controle actif de leur stabilite de fonctionnement PhD thesis 2000.

Lewis Bryan J, Cimbala John M, Wouden AM. Investigation of distributor vane jets to decrease the unsteady load on hydro turbine runner blades. IOP conference series, 2012.

Pérez-Loya JJ, Abrahamsson CJD, Lundin U. Demonstration of active compensation of unbalanced magnetic pull in synchronous machines, 2017.

Yao Fei, Qun-tao An, Sun Lizhi, Lipo Thomas A. Performance investigation of a brushless synchronous machine with additional harmonic field windings, 2016.

Bódis K, Monforti F, Szabó S. Could europe have more mini hydro sites? a suitability analysis based on continentally harmonized geographical and hydrological data, 2014.

Quaranta Emanuele, Revelli Roberto. Gravity water wheels as a micro hydropower energy source: a review based on historic data, design methods, efficiencies and modern optimizations, 2018.

Quaranta Emanuele, Müller Gerald. Sagebien and zuppinger water wheels for very low head hydropower applications, 2018.

Studies on the effectiveness alternative engine techniques and protection concepts for migrating fish in the operation of small hydropower plants. Zusammenarbeit; 2008.

Williams AA. Pumps as turbines for low cost micro hydro power. Renew Energy 1996.

Ogayar B, Vidal PG. Cost determination of the electro-mechanical equipment of a small hydro-power plant, 2009.

Choulot A. Energy recovery in existing infrastructures with small hydropower plants, 2010.

Hogan Timothy W, Cada Glenn F, Amaral Stephen V. The status of environmentally enhanced hydropower turbines, 2014.

Li H, Zhou D, Martinez JJ, Deng ZD, Johnson KI, Westman MP. Design and performance of composite runner blades for ultra low head turbines, 2019.

Quaranta E, Revelli R. Gravity water wheels as a micro hydropower energy source: a review based on historic data, design methods, efficiencies and modern optimizations, 2018.

Muñoz AH, Chiang LE, De la Jara EA. A design tool and fabrication guidelines for small low cost horizontal axis hydrokinetic turbines, 2014.

Kumar R, Singal SK. Operation and maintenance problems in hydro turbine material in small hydro power plant, 2015.

Baeza FJ, Galao O, Zornoza E, Garcés P. Multifunctional cement composites strain and damage sensors applied on reinforced concrete (RC) structural elements, 2013.

Chen SH, Yang ZM, Wang WM, Shahrour I. Study on rock bolt reinforcement for a gravity dam foundation, 2012.

Jia J, Lino M, Jin F, Zheng C. The cemented material dam: a new, environmentally friendly type of dam, 2016.

Marchi M, Vignoli MV, Picariello F. La nuova tecnica di impermeabilizzazione con membrane bituminose, 2017.

Lee JW, Park CG, Kim JO, Lee SK, Kim PS. Durability characteristics of glass fiber reinforced polymer composite clapping plates for application of rubber dam, 2011.

Saravanan P, Emami N. Sustainable tribology: processing and characterization of multiscale thermoplastic composites within hydropower applications, 2022.

Sasaki S. Environmentally friendly tribology (Eco-tribology), 2010.

Somberg J, Saravanan P, Shankar Vadivel H, Berglund K, Shi Y, Ukonsaari J, et al. Tribological characterisation of polymer composites for hydropower bearings, 2021.

Rodiouchkina M, Berglund K, Mouzon J, Forsberg F, Ullah Shah F, Rodushkin I, et al. Material characterization and influence of sliding speed and pressure on friction and wear behavior of self-lubricating bearing materials for hydropower applications, 2018.

Ren G, Oge K. Hydro-turbine main shaft axial seals of elastic polymerprinciple and practice. In: Proceedings of Waterpower XVI Conference; 2009.

Evans WA, Sousa J. Advances in sealing systems for water turbines, 2014.

Waters S, Aggidis G. Tidal range technologies and state of the art in review, 2016.

Boisseau A, Davies P, Thiebaud F. Sea water ageing of composites for ocean energy conversion systems: influence of glass fiber type on static behaviour, 2012.

Shiekh Elsouk MN, Santa Cruz A, Guillou SS. Review on the characterization and selection of the advanced materials for tidal turbine blades. In: Proceedings of the 7th International Conference on Ocean Energy, 2018.

Alin Ilie Bosioc, Susan-Resiga Romeo, Muntean Sebastian, Constantin T?nas?. Unsteady pressure analysis of a swirling flow with vortex rope and axial water injection in a discharge cone, 2012.

Muntean Sebastian, Alin Ilie Bosioc, Raul Alexandru Szakal, Vékás Ladislau, Florin Susan-Resiga Romeo. Hydrodynamic investigations in a swirl generator using a magneto-rheological brake. Materials design and applications, 2017.

Ioannis Kougiasa,? , George Aggidisb , François Avellanc , Sabri Denizd , Urban Lundine , Alberto Moroa , Sebastian Munteanf , Daniele Novarag , Juan Ignacio Pérez-Díazh , Emanuele Quarantai , Philippe Schildj , Nicolaos Theodossiouk. Analysis of emerging technologies in hydropower, 2019.

Shiekh Elsouk MN, Santa Cruz A, Guillou SS. Review on the characterization and selection of the advanced materials for tidal turbine blades. In: Proceedings of the 7th International Conference on Ocean Energy, 2018.

Somberg J, Saravanan P, Shankar Vadivel H, Berglund K, Shi Y, Ukonsaari J, et al. Tribological characterisation of polymer composites for hydropower bearings: experimentally developed versus commercial materials, 2021.

article IJEAP : Emerging Innovative technologies and Materials in Hydropower Sector

Downloads

Published

— Updated on 2023-01-25

How to Cite

[1]
H. Seman and G. E?KIRAN, “Emerging Innovative technologies and Materials in Hydropower Sector: A review”, International Journal of Engineering and Applied Physics, vol. 3, no. 1, pp. 600–611, Jan. 2023.

Issue

Section

Articles

ARK